MakeItFrom.com
Menu (ESC)
Home>Copper AlloyUp Three>Wrought Lightly Alloyed CopperUp Two>C19010 CopperUp One

TM08 Mill Hardened C19010 Copper

TM08 C19010 copper is C19010 copper in the TM08 (mill hardened to maximum) temper. The graph bars on the material properties cards below compare TM08 C19010 copper to: wrought coppers (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Elastic (Young's, Tensile) Modulus

120 GPa 17 x 106 psi

Poisson's Ratio

0.34

Shear Modulus

43 GPa 6.3 x 106 psi

Tensile Strength: Ultimate (UTS)

560 MPa 81 x 103 psi

Thermal Properties

Latent Heat of Fusion

210 J/g

Maximum Temperature: Mechanical

200 °C 400 °F

Melting Completion (Liquidus)

1060 °C 1940 °F

Melting Onset (Solidus)

1010 °C 1850 °F

Specific Heat Capacity

390 J/kg-K 0.093 BTU/lb-°F

Thermal Conductivity

260 W/m-K 150 BTU/h-ft-°F

Thermal Expansion

17 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

50 % IACS

Electrical Conductivity: Equal Weight (Specific)

50 % IACS

Otherwise Unclassified Properties

Base Metal Price

31 % relative

Density

8.9 g/cm3 560 lb/ft3

Embodied Carbon

2.7 kg CO2/kg material

Embodied Energy

42 MJ/kg 18 x 103 BTU/lb

Embodied Water

310 L/kg 37 gal/lb

Common Calculations

Resilience: Ultimate (Unit Rupture Work)

7.3 to 140 MJ/m3

Resilience: Unit (Modulus of Resilience)

290 to 1680 kJ/m3

Stiffness to Weight: Axial

7.3 points

Stiffness to Weight: Bending

18 points

Strength to Weight: Axial

17 points

Strength to Weight: Bending

17 points

Thermal Diffusivity

75 mm2/s

Thermal Shock Resistance

20 points

Alloy Composition

Copper (Cu)Cu 97.3 to 99.04
Nickel (Ni)Ni 0.8 to 1.8
Silicon (Si)Si 0.15 to 0.35
Phosphorus (P)P 0.010 to 0.050
Residualsres. 0 to 0.5

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

How are the material properties defined?How do I compare this exact variant to another material?

Further Reading

ASTM B422: Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper- Nickel-Tin Alloy Sheet and Strip

Copper: Its Trade, Manufacture, Use, and Environmental Status, Gunter Joseph, 2001

ASM Specialty Handbook: Copper and Copper Alloys, J. R. Davis (editor), 2001