# UNS R60704 Zirconium-Tin Alloy

R60704 alloy is a zirconium alloy. Cited properties are appropriate for the annealed condition. The graph bars on the material properties cards below compare R60704 alloy to: zirconium alloys (top), all alloys in the same category (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

## Mechanical Properties

Elastic (Young's, Tensile) Modulus

97 *GPa* 14 *x 10 ^{6} psi*

Elongation at Break

16 *%*

Poisson's Ratio

0.34

Shear Modulus

36 *GPa* 5.3 *x 10 ^{6} psi*

Tensile Strength: Ultimate (UTS)

470 *MPa* 68 *x 10 ^{3} psi*

Tensile Strength: Yield (Proof)

270 *MPa* 39 *x 10 ^{3} psi*

## Thermal Properties

Latent Heat of Fusion

240 *J/g*

Specific Heat Capacity

270 *J/kg-K* 0.064 *BTU/lb-°F*

Thermal Conductivity

22 *W/m-K* 12 *BTU/h-ft-°F*

Thermal Expansion

6.0 *µm/m-K*

## Otherwise Unclassified Properties

Density

6.7 *g/cm ^{3}* 420

*lb/ft*

^{3}Embodied Water

460 *L/kg* 55 *gal/lb*

## Common Calculations

Resilience: Ultimate (Unit Rupture Work)

64 *MJ/m ^{3}*

Resilience: Unit (Modulus of Resilience)

370 *kJ/m ^{3}*

Stiffness to Weight: Axial

8.1 *points*

Stiffness to Weight: Bending

23 *points*

Strength to Weight: Axial

20 *points*

Strength to Weight: Bending

20 *points*

Thermal Diffusivity

12 *mm ^{2}/s*

Thermal Shock Resistance

58 *points*

## Alloy Composition

Zr | 93 to 98.8 | |

Hf | 0 to 4.5 | |

Sn | 1.0 to 2.0 | |

Cr | 0.2 to 0.4 | |

Fe | 0.2 to 0.4 | |

O | 0 to 0.18 | |

C | 0 to 0.050 | |

N | 0 to 0.025 | |

H | 0 to 0.0050 |

All values are % weight. Ranges represent what is permitted under applicable standards.

## Followup Questions

## Similar Alloys

## Further Reading

ASTM B493: Standard Specification for Zirconium and Zirconium Alloy Forgings

ASTM B523: Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

ASTM B550: Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

ASTM B658: Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

ASTM B551: Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate