MakeItFrom.com
Menu (ESC)

2024 Aluminum vs. EN 1.0070 Steel

2024 aluminum belongs to the aluminum alloys classification, while EN 1.0070 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2024 aluminum and the bottom bar is EN 1.0070 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 4.0 to 16
9.1
Fatigue Strength, MPa 90 to 180
210
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Shear Strength, MPa 130 to 320
440
Tensile Strength: Ultimate (UTS), MPa 200 to 540
740
Tensile Strength: Yield (Proof), MPa 100 to 490
350

Thermal Properties

Latent Heat of Fusion, J/g 390
250
Maximum Temperature: Mechanical, °C 200
400
Melting Completion (Liquidus), °C 640
1470
Melting Onset (Solidus), °C 500
1430
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 120
53
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30
6.8
Electrical Conductivity: Equal Weight (Specific), % IACS 90
7.8

Otherwise Unclassified Properties

Base Metal Price, % relative 11
1.7
Density, g/cm3 3.0
7.9
Embodied Carbon, kg CO2/kg material 8.3
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1140
45

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 20 to 68
56
Resilience: Unit (Modulus of Resilience), kJ/m3 70 to 1680
320
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 18 to 50
26
Strength to Weight: Bending, points 25 to 49
23
Thermal Diffusivity, mm2/s 46
14
Thermal Shock Resistance, points 8.6 to 24
23

Alloy Composition

Aluminum (Al), % 90.7 to 94.7
0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 3.8 to 4.9
0
Iron (Fe), % 0 to 0.5
99.876 to 100
Magnesium (Mg), % 1.2 to 1.8
0
Manganese (Mn), % 0.3 to 0.9
0
Nitrogen (N), % 0
0 to 0.014
Phosphorus (P), % 0
0 to 0.055
Silicon (Si), % 0 to 0.5
0
Sulfur (S), % 0
0 to 0.055
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Zirconium (Zr), % 0 to 0.2
0
Residuals, % 0 to 0.15
0