MakeItFrom.com
Menu (ESC)

1050 Aluminum vs. C14500 Copper

1050 aluminum belongs to the aluminum alloys classification, while C14500 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1050 aluminum and the bottom bar is C14500 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
120
Elongation at Break, % 4.6 to 37
12 to 50
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 26
43
Shear Strength, MPa 52 to 81
150 to 190
Tensile Strength: Ultimate (UTS), MPa 76 to 140
220 to 330
Tensile Strength: Yield (Proof), MPa 25 to 120
69 to 260

Thermal Properties

Latent Heat of Fusion, J/g 400
210
Maximum Temperature: Mechanical, °C 170
200
Melting Completion (Liquidus), °C 640
1080
Melting Onset (Solidus), °C 650
1050
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 230
360
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 61
94
Electrical Conductivity: Equal Weight (Specific), % IACS 200
95

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
33
Density, g/cm3 2.7
8.9
Embodied Carbon, kg CO2/kg material 8.3
2.6
Embodied Energy, MJ/kg 160
42
Embodied Water, L/kg 1200
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 5.4 to 22
36 to 85
Resilience: Unit (Modulus of Resilience), kJ/m3 4.6 to 110
21 to 300
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
18
Strength to Weight: Axial, points 7.8 to 14
6.8 to 10
Strength to Weight: Bending, points 15 to 22
9.1 to 12
Thermal Diffusivity, mm2/s 94
100
Thermal Shock Resistance, points 3.4 to 6.2
8.0 to 12

Alloy Composition

Aluminum (Al), % 99.5 to 100
0
Copper (Cu), % 0 to 0.050
99.2 to 99.596
Iron (Fe), % 0 to 0.4
0
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.050
0
Phosphorus (P), % 0
0.0040 to 0.012
Silicon (Si), % 0 to 0.25
0
Tellurium (Te), % 0
0.4 to 0.7
Titanium (Ti), % 0 to 0.030
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.050
0