MakeItFrom.com
Menu (ESC)

2014 Aluminum vs. AWS ER80S-B2

2014 aluminum belongs to the aluminum alloys classification, while AWS ER80S-B2 belongs to the iron alloys. There are 27 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2014 aluminum and the bottom bar is AWS ER80S-B2.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
190
Elongation at Break, % 1.5 to 16
21
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Tensile Strength: Ultimate (UTS), MPa 190 to 500
620
Tensile Strength: Yield (Proof), MPa 100 to 440
540

Thermal Properties

Latent Heat of Fusion, J/g 400
260
Melting Completion (Liquidus), °C 630
1460
Melting Onset (Solidus), °C 510
1420
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 150
40
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
7.5
Electrical Conductivity: Equal Weight (Specific), % IACS 120
8.6

Otherwise Unclassified Properties

Base Metal Price, % relative 11
3.0
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.1
1.6
Embodied Energy, MJ/kg 150
21
Embodied Water, L/kg 1130
54

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.6 to 56
130
Resilience: Unit (Modulus of Resilience), kJ/m3 76 to 1330
760
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 18 to 46
22
Strength to Weight: Bending, points 25 to 46
21
Thermal Diffusivity, mm2/s 58
11
Thermal Shock Resistance, points 8.4 to 22
18

Alloy Composition

Aluminum (Al), % 90.4 to 95
0
Carbon (C), % 0
0.070 to 0.12
Chromium (Cr), % 0 to 0.1
1.2 to 1.5
Copper (Cu), % 3.9 to 5.0
0 to 0.35
Iron (Fe), % 0 to 0.7
95.2 to 97.5
Magnesium (Mg), % 0.2 to 0.8
0
Manganese (Mn), % 0.4 to 1.2
0.4 to 0.7
Molybdenum (Mo), % 0
0.4 to 0.65
Nickel (Ni), % 0
0 to 0.2
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0.5 to 1.2
0.4 to 0.7
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Zirconium (Zr), % 0 to 0.2
0
Residuals, % 0
0 to 0.5