MakeItFrom.com
Menu (ESC)

238.0 Aluminum vs. EN 1.0034 Steel

238.0 aluminum belongs to the aluminum alloys classification, while EN 1.0034 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 238.0 aluminum and the bottom bar is EN 1.0034 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 76
190
Elongation at Break, % 1.5
9.0 to 32
Fatigue Strength, MPa 110
140 to 170
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 28
73
Tensile Strength: Ultimate (UTS), MPa 210
340 to 380
Tensile Strength: Yield (Proof), MPa 170
180 to 280

Thermal Properties

Latent Heat of Fusion, J/g 430
250
Maximum Temperature: Mechanical, °C 170
400
Melting Completion (Liquidus), °C 600
1460
Melting Onset (Solidus), °C 510
1420
Specific Heat Capacity, J/kg-K 840
470
Thermal Conductivity, W/m-K 100
53
Thermal Expansion, µm/m-K 21
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 67
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 12
1.8
Density, g/cm3 3.4
7.9
Embodied Carbon, kg CO2/kg material 7.4
1.4
Embodied Energy, MJ/kg 140
18
Embodied Water, L/kg 1040
45

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.9
31 to 95
Resilience: Unit (Modulus of Resilience), kJ/m3 180
84 to 210
Stiffness to Weight: Axial, points 12
13
Stiffness to Weight: Bending, points 42
24
Strength to Weight: Axial, points 17
12 to 13
Strength to Weight: Bending, points 23
14 to 15
Thermal Diffusivity, mm2/s 37
14
Thermal Shock Resistance, points 9.1
11 to 12

Alloy Composition

Aluminum (Al), % 81.9 to 84.9
0
Carbon (C), % 0
0 to 0.15
Copper (Cu), % 9.5 to 10.5
0
Iron (Fe), % 1.0 to 1.5
98.7 to 100
Magnesium (Mg), % 0 to 0.25
0
Manganese (Mn), % 0
0 to 0.7
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 3.6 to 4.4
0 to 0.35
Sulfur (S), % 0
0 to 0.045
Zinc (Zn), % 1.0 to 1.5
0