MakeItFrom.com
Menu (ESC)

296.0 Aluminum vs. EN 1.4008 Stainless Steel

296.0 aluminum belongs to the aluminum alloys classification, while EN 1.4008 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 296.0 aluminum and the bottom bar is EN 1.4008 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
190
Elongation at Break, % 3.2 to 7.1
17
Fatigue Strength, MPa 47 to 70
300
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
76
Tensile Strength: Ultimate (UTS), MPa 260 to 270
670
Tensile Strength: Yield (Proof), MPa 120 to 180
500

Thermal Properties

Latent Heat of Fusion, J/g 420
280
Maximum Temperature: Mechanical, °C 170
760
Melting Completion (Liquidus), °C 630
1450
Melting Onset (Solidus), °C 540
1400
Specific Heat Capacity, J/kg-K 870
480
Thermal Conductivity, W/m-K 130 to 150
25
Thermal Expansion, µm/m-K 22
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 33 to 37
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 99 to 110
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 11
8.0
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 7.8
2.1
Embodied Energy, MJ/kg 150
30
Embodied Water, L/kg 1110
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 7.6 to 15
100
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 220
630
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
25
Strength to Weight: Axial, points 24 to 25
24
Strength to Weight: Bending, points 30 to 31
22
Thermal Diffusivity, mm2/s 51 to 56
6.7
Thermal Shock Resistance, points 12
23

Alloy Composition

Aluminum (Al), % 89 to 94
0
Carbon (C), % 0
0 to 0.1
Chromium (Cr), % 0
12 to 13.5
Copper (Cu), % 4.0 to 5.0
0
Iron (Fe), % 0 to 1.2
81.8 to 86.8
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.35
0 to 1.0
Molybdenum (Mo), % 0
0.2 to 0.5
Nickel (Ni), % 0 to 0.35
1.0 to 2.0
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 2.0 to 3.0
0 to 1.0
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.35
0