MakeItFrom.com
Menu (ESC)

3005 Aluminum vs. EN 1.0308 Steel

3005 aluminum belongs to the aluminum alloys classification, while EN 1.0308 steel belongs to the iron alloys. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 3005 aluminum and the bottom bar is EN 1.0308 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 33 to 73
100 to 130
Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 1.1 to 16
7.8 to 28
Fatigue Strength, MPa 53 to 100
140 to 200
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 84 to 150
230 to 260
Tensile Strength: Ultimate (UTS), MPa 140 to 270
360 to 440
Tensile Strength: Yield (Proof), MPa 51 to 240
190 to 340

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 180
400
Melting Completion (Liquidus), °C 660
1460
Melting Onset (Solidus), °C 640
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
51
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 140
8.1

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.8
Density, g/cm3 2.8
7.9
Embodied Carbon, kg CO2/kg material 8.2
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1180
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.2 to 18
32 to 95
Resilience: Unit (Modulus of Resilience), kJ/m3 18 to 390
93 to 300
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 49
24
Strength to Weight: Axial, points 14 to 27
13 to 16
Strength to Weight: Bending, points 21 to 33
14 to 16
Thermal Diffusivity, mm2/s 64
14
Thermal Shock Resistance, points 6.0 to 12
11 to 14

Alloy Composition

Aluminum (Al), % 95.7 to 98.8
0
Carbon (C), % 0
0 to 0.17
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.3
0
Iron (Fe), % 0 to 0.7
98.2 to 100
Magnesium (Mg), % 0.2 to 0.6
0
Manganese (Mn), % 1.0 to 1.5
0 to 1.2
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.6
0 to 0.35
Sulfur (S), % 0
0 to 0.045
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0

Comparable Variants