MakeItFrom.com
Menu (ESC)

333.0 Aluminum vs. R60804 Alloy

333.0 aluminum belongs to the aluminum alloys classification, while R60804 alloy belongs to the otherwise unclassified metals. There are 20 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 333.0 aluminum and the bottom bar is R60804 alloy.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 73
98
Elongation at Break, % 1.0 to 2.0
22
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 28
36
Tensile Strength: Ultimate (UTS), MPa 230 to 280
430
Tensile Strength: Yield (Proof), MPa 130 to 210
270

Thermal Properties

Latent Heat of Fusion, J/g 520
250
Specific Heat Capacity, J/kg-K 880
270
Thermal Conductivity, W/m-K 100 to 140
22
Thermal Expansion, µm/m-K 21
6.0

Otherwise Unclassified Properties

Density, g/cm3 2.8
6.5
Embodied Water, L/kg 1040
290

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.1 to 4.6
85
Resilience: Unit (Modulus of Resilience), kJ/m3 120 to 290
380
Stiffness to Weight: Axial, points 14
8.3
Stiffness to Weight: Bending, points 49
23
Strength to Weight: Axial, points 22 to 27
18
Strength to Weight: Bending, points 29 to 34
19
Thermal Diffusivity, mm2/s 42 to 57
12
Thermal Shock Resistance, points 11 to 13
53

Alloy Composition

Aluminum (Al), % 81.8 to 89
0
Chromium (Cr), % 0
0.070 to 0.13
Copper (Cu), % 3.0 to 4.0
0
Iron (Fe), % 0 to 1.0
0.18 to 0.24
Magnesium (Mg), % 0.050 to 0.5
0
Manganese (Mn), % 0 to 0.5
0
Nickel (Ni), % 0 to 0.5
0
Silicon (Si), % 8.0 to 10
0
Tin (Sn), % 0
1.2 to 1.7
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 1.0
0
Zirconium (Zr), % 0
97.8 to 98.6
Residuals, % 0
0 to 0.12