MakeItFrom.com
Menu (ESC)

7020 Aluminum vs. SAE-AISI M44 Steel

7020 aluminum belongs to the aluminum alloys classification, while SAE-AISI M44 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7020 aluminum and the bottom bar is SAE-AISI M44 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
78
Tensile Strength: Ultimate (UTS), MPa 190 to 390
870 to 2290

Thermal Properties

Latent Heat of Fusion, J/g 380
270
Melting Completion (Liquidus), °C 650
1590
Melting Onset (Solidus), °C 610
1540
Specific Heat Capacity, J/kg-K 880
440
Thermal Conductivity, W/m-K 150
14
Thermal Expansion, µm/m-K 23
12

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
43
Density, g/cm3 2.9
8.4
Embodied Carbon, kg CO2/kg material 8.3
9.9
Embodied Energy, MJ/kg 150
150
Embodied Water, L/kg 1150
170

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 47
23
Strength to Weight: Axial, points 18 to 37
28 to 75
Strength to Weight: Bending, points 25 to 41
24 to 46
Thermal Diffusivity, mm2/s 59
3.7
Thermal Shock Resistance, points 8.3 to 17
27 to 70

Alloy Composition

Aluminum (Al), % 91.2 to 94.8
0
Carbon (C), % 0
1.1 to 1.2
Chromium (Cr), % 0.1 to 0.35
4.0 to 4.8
Cobalt (Co), % 0
11 to 12.3
Copper (Cu), % 0 to 0.2
0 to 0.25
Iron (Fe), % 0 to 0.4
65.3 to 70.6
Magnesium (Mg), % 1.0 to 1.4
0
Manganese (Mn), % 0.050 to 0.5
0.2 to 0.4
Molybdenum (Mo), % 0
6.0 to 7.0
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.35
0.3 to 0.55
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Tungsten (W), % 0
5.0 to 5.8
Vanadium (V), % 0
1.9 to 2.2
Zinc (Zn), % 4.0 to 5.0
0
Zirconium (Zr), % 0.080 to 0.25
0
Residuals, % 0 to 0.15
0

Comparable Variants