MakeItFrom.com
Menu (ESC)

7049 Aluminum vs. SAE-AISI P20 Steel

7049 aluminum belongs to the aluminum alloys classification, while SAE-AISI P20 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7049 aluminum and the bottom bar is SAE-AISI P20 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Poisson's Ratio 0.32
0.29
Shear Modulus, GPa 27
73
Tensile Strength: Ultimate (UTS), MPa 510 to 530
540 to 1050

Thermal Properties

Latent Heat of Fusion, J/g 370
260
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 480
1420
Specific Heat Capacity, J/kg-K 860
470
Thermal Conductivity, W/m-K 130
45
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 36
7.4
Electrical Conductivity: Equal Weight (Specific), % IACS 110
8.5

Otherwise Unclassified Properties

Base Metal Price, % relative 10
2.8
Density, g/cm3 3.1
7.8
Embodied Carbon, kg CO2/kg material 8.1
1.6
Embodied Energy, MJ/kg 140
21
Embodied Water, L/kg 1110
52

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
24
Strength to Weight: Axial, points 46 to 47
19 to 37
Strength to Weight: Bending, points 46 to 47
19 to 29
Thermal Diffusivity, mm2/s 51
12
Thermal Shock Resistance, points 22 to 23
18 to 35

Alloy Composition

Aluminum (Al), % 85.7 to 89.5
0
Carbon (C), % 0
0.28 to 0.4
Chromium (Cr), % 0.1 to 0.22
0.4 to 2.0
Copper (Cu), % 1.2 to 1.9
0 to 0.25
Iron (Fe), % 0 to 0.35
95.2 to 98.5
Magnesium (Mg), % 2.0 to 2.9
0
Manganese (Mn), % 0 to 0.2
0.35 to 0.71
Molybdenum (Mo), % 0
0.3 to 0.55
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.25
0.2 to 0.8
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 7.2 to 8.2
0
Residuals, % 0 to 0.15
0