MakeItFrom.com
Menu (ESC)

A206.0 Aluminum vs. EN 1.4008 Stainless Steel

A206.0 aluminum belongs to the aluminum alloys classification, while EN 1.4008 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is A206.0 aluminum and the bottom bar is EN 1.4008 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 4.2 to 10
17
Fatigue Strength, MPa 90 to 180
300
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
76
Tensile Strength: Ultimate (UTS), MPa 390 to 440
670
Tensile Strength: Yield (Proof), MPa 250 to 380
500

Thermal Properties

Latent Heat of Fusion, J/g 390
280
Maximum Temperature: Mechanical, °C 170
760
Melting Completion (Liquidus), °C 670
1450
Melting Onset (Solidus), °C 550
1400
Specific Heat Capacity, J/kg-K 880
480
Thermal Conductivity, W/m-K 130
25
Thermal Expansion, µm/m-K 23
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 90
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 11
8.0
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.0
2.1
Embodied Energy, MJ/kg 150
30
Embodied Water, L/kg 1150
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 16 to 37
100
Resilience: Unit (Modulus of Resilience), kJ/m3 440 to 1000
630
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
25
Strength to Weight: Axial, points 36 to 41
24
Strength to Weight: Bending, points 39 to 43
22
Thermal Diffusivity, mm2/s 48
6.7
Thermal Shock Resistance, points 17 to 19
23

Alloy Composition

Aluminum (Al), % 93.9 to 95.7
0
Carbon (C), % 0
0 to 0.1
Chromium (Cr), % 0
12 to 13.5
Copper (Cu), % 4.2 to 5.0
0
Iron (Fe), % 0 to 0.1
81.8 to 86.8
Magnesium (Mg), % 0 to 0.15
0
Manganese (Mn), % 0 to 0.2
0 to 1.0
Molybdenum (Mo), % 0
0.2 to 0.5
Nickel (Ni), % 0 to 0.050
1.0 to 2.0
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.050
0 to 1.0
Sulfur (S), % 0
0 to 0.025
Tin (Sn), % 0 to 0.050
0
Titanium (Ti), % 0.15 to 0.3
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0