MakeItFrom.com
Menu (ESC)

AISI 201L Stainless Steel vs. 2014 Aluminum

AISI 201L stainless steel belongs to the iron alloys classification, while 2014 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 201L stainless steel and the bottom bar is 2014 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
72
Elongation at Break, % 22 to 46
1.5 to 16
Fatigue Strength, MPa 270 to 530
90 to 160
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Shear Strength, MPa 520 to 660
130 to 290
Tensile Strength: Ultimate (UTS), MPa 740 to 1040
190 to 500
Tensile Strength: Yield (Proof), MPa 290 to 790
100 to 440

Thermal Properties

Latent Heat of Fusion, J/g 280
400
Maximum Temperature: Mechanical, °C 880
210
Melting Completion (Liquidus), °C 1410
630
Melting Onset (Solidus), °C 1370
510
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 15
150
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
40
Electrical Conductivity: Equal Weight (Specific), % IACS 2.9
120

Otherwise Unclassified Properties

Base Metal Price, % relative 12
11
Density, g/cm3 7.7
3.0
Embodied Carbon, kg CO2/kg material 2.6
8.1
Embodied Energy, MJ/kg 38
150
Embodied Water, L/kg 140
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 210 to 300
6.6 to 56
Resilience: Unit (Modulus of Resilience), kJ/m3 220 to 1570
76 to 1330
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 27 to 37
18 to 46
Strength to Weight: Bending, points 24 to 30
25 to 46
Thermal Diffusivity, mm2/s 4.0
58
Thermal Shock Resistance, points 16 to 23
8.4 to 22

Alloy Composition

Aluminum (Al), % 0
90.4 to 95
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 16 to 18
0 to 0.1
Copper (Cu), % 0
3.9 to 5.0
Iron (Fe), % 67.9 to 75
0 to 0.7
Magnesium (Mg), % 0
0.2 to 0.8
Manganese (Mn), % 5.5 to 7.5
0.4 to 1.2
Nickel (Ni), % 3.5 to 5.5
0
Nitrogen (N), % 0 to 0.25
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 0.75
0.5 to 1.2
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15

Comparable Variants