MakeItFrom.com
Menu (ESC)

AISI 317L Stainless Steel vs. EN AC-47000 Aluminum

AISI 317L stainless steel belongs to the iron alloys classification, while EN AC-47000 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 317L stainless steel and the bottom bar is EN AC-47000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180
60
Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 44
1.7
Fatigue Strength, MPa 220
68
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 82
27
Tensile Strength: Ultimate (UTS), MPa 550
180
Tensile Strength: Yield (Proof), MPa 250
97

Thermal Properties

Latent Heat of Fusion, J/g 290
570
Maximum Temperature: Mechanical, °C 1010
170
Melting Completion (Liquidus), °C 1400
590
Melting Onset (Solidus), °C 1380
570
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 14
130
Thermal Expansion, µm/m-K 17
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.0
33
Electrical Conductivity: Equal Weight (Specific), % IACS 2.3
110

Otherwise Unclassified Properties

Base Metal Price, % relative 21
9.5
Density, g/cm3 7.9
2.6
Embodied Carbon, kg CO2/kg material 4.3
7.7
Embodied Energy, MJ/kg 59
140
Embodied Water, L/kg 160
1040

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 200
2.5
Resilience: Unit (Modulus of Resilience), kJ/m3 150
65
Stiffness to Weight: Axial, points 14
16
Stiffness to Weight: Bending, points 25
54
Strength to Weight: Axial, points 19
19
Strength to Weight: Bending, points 19
27
Thermal Diffusivity, mm2/s 3.8
55
Thermal Shock Resistance, points 12
8.3

Alloy Composition

Aluminum (Al), % 0
82.1 to 89.5
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 18 to 20
0 to 0.1
Copper (Cu), % 0
0 to 1.0
Iron (Fe), % 58 to 68
0 to 0.8
Lead (Pb), % 0
0 to 0.2
Magnesium (Mg), % 0
0 to 0.35
Manganese (Mn), % 0 to 2.0
0.050 to 0.55
Molybdenum (Mo), % 3.0 to 4.0
0
Nickel (Ni), % 11 to 15
0 to 0.3
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 0.75
10.5 to 13.5
Sulfur (S), % 0 to 0.030
0
Tin (Sn), % 0
0 to 0.1
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.55
Residuals, % 0
0 to 0.25