MakeItFrom.com
Menu (ESC)

AM60B Magnesium vs. EN 1.4034 Stainless Steel

AM60B magnesium belongs to the magnesium alloys classification, while EN 1.4034 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AM60B magnesium and the bottom bar is EN 1.4034 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
190
Elongation at Break, % 11
11 to 14
Fatigue Strength, MPa 96
230 to 400
Poisson's Ratio 0.29
0.28
Shear Modulus, GPa 17
76
Shear Strength, MPa 140
420 to 540
Tensile Strength: Ultimate (UTS), MPa 230
690 to 900
Tensile Strength: Yield (Proof), MPa 130
390 to 730

Thermal Properties

Latent Heat of Fusion, J/g 350
270
Maximum Temperature: Mechanical, °C 120
770
Melting Completion (Liquidus), °C 620
1440
Melting Onset (Solidus), °C 540
1390
Specific Heat Capacity, J/kg-K 1000
480
Thermal Conductivity, W/m-K 61
30
Thermal Expansion, µm/m-K 26
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 13
3.1
Electrical Conductivity: Equal Weight (Specific), % IACS 72
3.7

Otherwise Unclassified Properties

Base Metal Price, % relative 12
7.0
Density, g/cm3 1.7
7.7
Embodied Carbon, kg CO2/kg material 23
2.0
Embodied Energy, MJ/kg 160
27
Embodied Water, L/kg 990
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21
81 to 94
Resilience: Unit (Modulus of Resilience), kJ/m3 190
400 to 1370
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 71
25
Strength to Weight: Axial, points 38
25 to 32
Strength to Weight: Bending, points 50
22 to 27
Thermal Diffusivity, mm2/s 37
8.1
Thermal Shock Resistance, points 14
24 to 32

Alloy Composition

Aluminum (Al), % 5.5 to 6.5
0
Carbon (C), % 0
0.43 to 0.5
Chromium (Cr), % 0
12.5 to 14.5
Copper (Cu), % 0 to 0.010
0
Iron (Fe), % 0 to 0.0050
83 to 87.1
Magnesium (Mg), % 92.6 to 94.3
0
Manganese (Mn), % 0.24 to 0.6
0 to 1.0
Nickel (Ni), % 0 to 0.0020
0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.1
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Zinc (Zn), % 0 to 0.22
0