MakeItFrom.com
Menu (ESC)

EN 1.0503 Steel vs. B443.0 Aluminum

EN 1.0503 steel belongs to the iron alloys classification, while B443.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.0503 steel and the bottom bar is B443.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180
43
Elastic (Young's, Tensile) Modulus, GPa 190
70
Elongation at Break, % 16
4.9
Fatigue Strength, MPa 210
55
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 72
26
Shear Strength, MPa 380
110
Tensile Strength: Ultimate (UTS), MPa 630
150
Tensile Strength: Yield (Proof), MPa 310
50

Thermal Properties

Latent Heat of Fusion, J/g 250
470
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
620
Melting Onset (Solidus), °C 1420
600
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 48
150
Thermal Expansion, µm/m-K 12
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.2
38
Electrical Conductivity: Equal Weight (Specific), % IACS 8.3
130

Otherwise Unclassified Properties

Base Metal Price, % relative 2.1
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.4
8.0
Embodied Energy, MJ/kg 19
150
Embodied Water, L/kg 47
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 83
5.6
Resilience: Unit (Modulus of Resilience), kJ/m3 260
18
Stiffness to Weight: Axial, points 13
15
Stiffness to Weight: Bending, points 24
52
Strength to Weight: Axial, points 22
15
Strength to Weight: Bending, points 21
23
Thermal Diffusivity, mm2/s 13
61
Thermal Shock Resistance, points 20
6.8

Alloy Composition


Deprecated: Automatic conversion of false to array is deprecated in /home/public/compare.php on line 460
Aluminum (Al), % 0
91.9 to 95.5
Carbon (C), % 0.42 to 0.5
0
Chromium (Cr), % 0 to 0.4
0
Copper (Cu), % 0
0 to 0.15
Iron (Fe), % 97.3 to 99.08
0 to 0.8
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 0.5 to 0.8
0 to 0.35
Molybdenum (Mo), % 0 to 0.1
0
Nickel (Ni), % 0 to 0.4
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 0.4
4.5 to 6.0
Sulfur (S), % 0 to 0.045
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15