MakeItFrom.com
Menu (ESC)

EN 1.0558 Cast Steel vs. 1050 Aluminum

EN 1.0558 cast steel belongs to the iron alloys classification, while 1050 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.0558 cast steel and the bottom bar is 1050 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 18
4.6 to 37
Fatigue Strength, MPa 230
31 to 57
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
26
Tensile Strength: Ultimate (UTS), MPa 640
76 to 140
Tensile Strength: Yield (Proof), MPa 340
25 to 120

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1470
640
Melting Onset (Solidus), °C 1430
650
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 53
230
Thermal Expansion, µm/m-K 12
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.8
61
Electrical Conductivity: Equal Weight (Specific), % IACS 8.9
200

Otherwise Unclassified Properties

Base Metal Price, % relative 1.7
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 1.4
8.3
Embodied Energy, MJ/kg 18
160
Embodied Water, L/kg 45
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 99
5.4 to 22
Resilience: Unit (Modulus of Resilience), kJ/m3 300
4.6 to 110
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 22
7.8 to 14
Strength to Weight: Bending, points 21
15 to 22
Thermal Diffusivity, mm2/s 14
94
Thermal Shock Resistance, points 20
3.4 to 6.2

Alloy Composition

Aluminum (Al), % 0
99.5 to 100
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 99.935 to 100
0 to 0.4
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 0
0 to 0.050
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0
0 to 0.25
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.030
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.050