MakeItFrom.com
Menu (ESC)

EN 1.1233 Steel vs. SAE-AISI 5160 Steel

Both EN 1.1233 steel and SAE-AISI 5160 steel are iron alloys. Their average alloy composition is basically identical. There are 25 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown.

For each property being compared, the top bar is EN 1.1233 steel and the bottom bar is SAE-AISI 5160 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 200 to 220
200 to 340
Elastic (Young's, Tensile) Modulus, GPa 190
190
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 72
73
Tensile Strength: Ultimate (UTS), MPa 680 to 760
660 to 1150

Thermal Properties

Latent Heat of Fusion, J/g 250
250
Maximum Temperature: Mechanical, °C 400
420
Melting Completion (Liquidus), °C 1450
1450
Melting Onset (Solidus), °C 1410
1410
Specific Heat Capacity, J/kg-K 470
470
Thermal Conductivity, W/m-K 51
43
Thermal Expansion, µm/m-K 12
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.1
7.2
Electrical Conductivity: Equal Weight (Specific), % IACS 8.2
8.3

Otherwise Unclassified Properties

Base Metal Price, % relative 1.9
2.1
Density, g/cm3 7.8
7.8
Embodied Carbon, kg CO2/kg material 1.4
1.4
Embodied Energy, MJ/kg 19
19
Embodied Water, L/kg 47
50

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
24
Strength to Weight: Axial, points 24 to 27
23 to 41
Strength to Weight: Bending, points 22 to 24
22 to 31
Thermal Diffusivity, mm2/s 14
12
Thermal Shock Resistance, points 22 to 24
19 to 34

Alloy Composition

Aluminum (Al), % 0 to 0.050
0
Carbon (C), % 0.52 to 0.6
0.56 to 0.61
Chromium (Cr), % 0
0.7 to 0.9
Copper (Cu), % 0 to 0.3
0
Iron (Fe), % 98 to 99.1
97.1 to 97.8
Manganese (Mn), % 0.9 to 1.2
0.75 to 1.0
Oxygen (O), % 0 to 0.0020
0
Phosphorus (P), % 0 to 0.025
0 to 0.035
Silicon (Si), % 0 to 0.4
0.15 to 0.35
Sulfur (S), % 0 to 0.030
0 to 0.040

Comparable Variants