MakeItFrom.com
Menu (ESC)

EN 1.4123 Stainless Steel vs. SAE-AISI H10 Steel

Both EN 1.4123 stainless steel and SAE-AISI H10 steel are iron alloys. They have 88% of their average alloy composition in common. There are 24 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown.

For each property being compared, the top bar is EN 1.4123 stainless steel and the bottom bar is SAE-AISI H10 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
190
Poisson's Ratio 0.28
0.29
Shear Modulus, GPa 77
74
Tensile Strength: Ultimate (UTS), MPa 720 to 810
680 to 2030

Thermal Properties

Latent Heat of Fusion, J/g 280
270
Melting Completion (Liquidus), °C 1450
1470
Melting Onset (Solidus), °C 1410
1420
Specific Heat Capacity, J/kg-K 480
470
Thermal Conductivity, W/m-K 23
38
Thermal Expansion, µm/m-K 10
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
8.0
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
9.2

Otherwise Unclassified Properties

Base Metal Price, % relative 10
6.5
Density, g/cm3 7.7
7.8
Embodied Carbon, kg CO2/kg material 4.2
3.4
Embodied Energy, MJ/kg 62
48
Embodied Water, L/kg 120
71

Common Calculations

PREN (Pitting Resistance) 24
12
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
25
Strength to Weight: Axial, points 26 to 29
24 to 72
Strength to Weight: Bending, points 23 to 25
22 to 46
Thermal Diffusivity, mm2/s 6.3
10
Thermal Shock Resistance, points 26 to 29
22 to 66

Alloy Composition

Carbon (C), % 0.35 to 0.5
0.35 to 0.45
Chromium (Cr), % 14 to 16.5
3.0 to 3.8
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 76.7 to 84.6
89.5 to 93.4
Manganese (Mn), % 0 to 1.0
0.25 to 0.7
Molybdenum (Mo), % 1.0 to 2.5
2.0 to 3.0
Nickel (Ni), % 0 to 0.5
0 to 0.3
Nitrogen (N), % 0.1 to 0.3
0
Phosphorus (P), % 0 to 0.040
0 to 0.030
Silicon (Si), % 0 to 1.0
0.8 to 1.2
Sulfur (S), % 0 to 0.030
0 to 0.030
Vanadium (V), % 0 to 1.5
0.25 to 0.75

Comparable Variants