MakeItFrom.com
Menu (ESC)

EN 1.4123 Stainless Steel vs. R05252 Alloy

EN 1.4123 stainless steel belongs to the iron alloys classification, while R05252 alloy belongs to the otherwise unclassified metals. There are 14 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4123 stainless steel and the bottom bar is R05252 alloy.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
200
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
73
Tensile Strength: Ultimate (UTS), MPa 720 to 810
310

Thermal Properties

Latent Heat of Fusion, J/g 280
140
Specific Heat Capacity, J/kg-K 480
140
Thermal Expansion, µm/m-K 10
6.7

Otherwise Unclassified Properties

Density, g/cm3 7.7
17
Embodied Water, L/kg 120
600

Common Calculations

Stiffness to Weight: Axial, points 14
6.5
Stiffness to Weight: Bending, points 25
12
Strength to Weight: Axial, points 26 to 29
5.2
Strength to Weight: Bending, points 23 to 25
6.1
Thermal Shock Resistance, points 26 to 29
17

Alloy Composition

Carbon (C), % 0.35 to 0.5
0 to 0.010
Chromium (Cr), % 14 to 16.5
0
Hydrogen (H), % 0
0 to 0.0015
Iron (Fe), % 76.7 to 84.6
0 to 0.010
Manganese (Mn), % 0 to 1.0
0
Molybdenum (Mo), % 1.0 to 2.5
0 to 0.020
Nickel (Ni), % 0 to 0.5
0 to 0.010
Niobium (Nb), % 0
0 to 0.1
Nitrogen (N), % 0.1 to 0.3
0 to 0.010
Oxygen (O), % 0
0 to 0.015
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.0050
Sulfur (S), % 0 to 0.030
0
Tantalum (Ta), % 0
88.8 to 91
Titanium (Ti), % 0
0 to 0.010
Tungsten (W), % 0
9.0 to 11
Vanadium (V), % 0 to 1.5
0