MakeItFrom.com
Menu (ESC)

EN 1.4560 Stainless Steel vs. 413.0 Aluminum

EN 1.4560 stainless steel belongs to the iron alloys classification, while 413.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4560 stainless steel and the bottom bar is 413.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180
80
Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 50
2.5
Fatigue Strength, MPa 190
130
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
28
Shear Strength, MPa 390
170
Tensile Strength: Ultimate (UTS), MPa 550
270
Tensile Strength: Yield (Proof), MPa 190
140

Thermal Properties

Latent Heat of Fusion, J/g 290
570
Maximum Temperature: Mechanical, °C 940
170
Melting Completion (Liquidus), °C 1420
590
Melting Onset (Solidus), °C 1370
580
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
140
Thermal Expansion, µm/m-K 16
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
120

Otherwise Unclassified Properties

Base Metal Price, % relative 15
9.5
Density, g/cm3 7.8
2.6
Embodied Carbon, kg CO2/kg material 3.0
7.6
Embodied Energy, MJ/kg 42
140
Embodied Water, L/kg 150
1040

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 220
5.7
Resilience: Unit (Modulus of Resilience), kJ/m3 92
130
Stiffness to Weight: Axial, points 14
16
Stiffness to Weight: Bending, points 25
53
Strength to Weight: Axial, points 20
29
Strength to Weight: Bending, points 19
36
Thermal Diffusivity, mm2/s 4.0
59
Thermal Shock Resistance, points 12
13

Alloy Composition

Aluminum (Al), % 0
82.2 to 89
Carbon (C), % 0 to 0.035
0
Chromium (Cr), % 18 to 19
0
Copper (Cu), % 1.5 to 2.0
0 to 1.0
Iron (Fe), % 66.8 to 71
0 to 2.0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 1.5 to 2.0
0 to 0.35
Nickel (Ni), % 8.0 to 9.0
0 to 0.5
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
11 to 13
Sulfur (S), % 0 to 0.015
0
Tin (Sn), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.5
Residuals, % 0
0 to 0.25