MakeItFrom.com
Menu (ESC)

EN 1.4615 Stainless Steel vs. 2095 Aluminum

EN 1.4615 stainless steel belongs to the iron alloys classification, while 2095 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4615 stainless steel and the bottom bar is 2095 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
70
Elongation at Break, % 50
8.5
Fatigue Strength, MPa 190
200
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 360
410
Tensile Strength: Ultimate (UTS), MPa 500
700
Tensile Strength: Yield (Proof), MPa 200
610

Thermal Properties

Latent Heat of Fusion, J/g 280
390
Maximum Temperature: Mechanical, °C 840
210
Melting Completion (Liquidus), °C 1400
660
Melting Onset (Solidus), °C 1360
540
Specific Heat Capacity, J/kg-K 480
910
Thermal Conductivity, W/m-K 15
130
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
110

Otherwise Unclassified Properties

Base Metal Price, % relative 13
31
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 2.8
8.6
Embodied Energy, MJ/kg 40
160
Embodied Water, L/kg 140
1470

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 200
57
Resilience: Unit (Modulus of Resilience), kJ/m3 99
2640
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 18
65
Strength to Weight: Bending, points 18
59
Thermal Diffusivity, mm2/s 4.1
49
Thermal Shock Resistance, points 11
31

Alloy Composition

Aluminum (Al), % 0
91.3 to 94.9
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 14 to 16
0
Copper (Cu), % 2.0 to 4.0
3.9 to 4.6
Iron (Fe), % 63.1 to 72.5
0 to 0.15
Lithium (Li), % 0
0.7 to 1.5
Magnesium (Mg), % 0
0.25 to 0.8
Manganese (Mn), % 7.0 to 9.0
0 to 0.25
Molybdenum (Mo), % 0 to 0.8
0
Nickel (Ni), % 4.5 to 6.0
0
Nitrogen (N), % 0.020 to 0.060
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.12
Silver (Ag), % 0
0.25 to 0.6
Sulfur (S), % 0 to 0.010
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0.040 to 0.18
Residuals, % 0
0 to 0.15