MakeItFrom.com
Menu (ESC)

EN 1.4912 Stainless Steel vs. 5026 Aluminum

EN 1.4912 stainless steel belongs to the iron alloys classification, while 5026 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4912 stainless steel and the bottom bar is 5026 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 40
5.1 to 11
Fatigue Strength, MPa 200
94 to 140
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 420
150 to 180
Tensile Strength: Ultimate (UTS), MPa 610
260 to 320
Tensile Strength: Yield (Proof), MPa 230
120 to 250

Thermal Properties

Latent Heat of Fusion, J/g 290
400
Maximum Temperature: Mechanical, °C 940
210
Melting Completion (Liquidus), °C 1430
650
Melting Onset (Solidus), °C 1390
510
Specific Heat Capacity, J/kg-K 480
890
Thermal Conductivity, W/m-K 16
130
Thermal Expansion, µm/m-K 16
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
31
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
99

Otherwise Unclassified Properties

Base Metal Price, % relative 20
9.5
Density, g/cm3 7.8
2.8
Embodied Carbon, kg CO2/kg material 3.8
8.9
Embodied Energy, MJ/kg 55
150
Embodied Water, L/kg 140
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 190
15 to 29
Resilience: Unit (Modulus of Resilience), kJ/m3 130
100 to 440
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
49
Strength to Weight: Axial, points 22
26 to 32
Strength to Weight: Bending, points 20
33 to 37
Thermal Diffusivity, mm2/s 4.2
52
Thermal Shock Resistance, points 14
11 to 14

Alloy Composition

Aluminum (Al), % 0
88.2 to 94.7
Carbon (C), % 0.040 to 0.1
0
Chromium (Cr), % 17 to 19
0 to 0.3
Copper (Cu), % 0
0.1 to 0.8
Iron (Fe), % 64.6 to 73.6
0.2 to 1.0
Magnesium (Mg), % 0
3.9 to 4.9
Manganese (Mn), % 0 to 2.0
0.6 to 1.8
Nickel (Ni), % 9.0 to 12
0
Niobium (Nb), % 0.4 to 1.2
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
0.55 to 1.4
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 1.0
Zirconium (Zr), % 0
0 to 0.3
Residuals, % 0
0 to 0.15