MakeItFrom.com
Menu (ESC)

EN 1.5662 Steel vs. 390.0 Aluminum

EN 1.5662 steel belongs to the iron alloys classification, while 390.0 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.5662 steel and the bottom bar is 390.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 220 to 230
120
Elastic (Young's, Tensile) Modulus, GPa 190
75
Elongation at Break, % 20
1.0
Fatigue Strength, MPa 380 to 450
76 to 110
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
28
Tensile Strength: Ultimate (UTS), MPa 740 to 750
280 to 300
Tensile Strength: Yield (Proof), MPa 550 to 660
240 to 270

Thermal Properties

Latent Heat of Fusion, J/g 250
640
Maximum Temperature: Mechanical, °C 430
170
Melting Completion (Liquidus), °C 1460
650
Melting Onset (Solidus), °C 1410
560
Specific Heat Capacity, J/kg-K 470
880
Thermal Expansion, µm/m-K 13
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 8.7
24 to 25
Electrical Conductivity: Equal Weight (Specific), % IACS 9.8
79 to 83

Otherwise Unclassified Properties

Base Metal Price, % relative 7.5
11
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 2.3
7.3
Embodied Energy, MJ/kg 31
130
Embodied Water, L/kg 63
950

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140 to 150
2.7 to 2.9
Resilience: Unit (Modulus of Resilience), kJ/m3 810 to 1150
380 to 470
Stiffness to Weight: Axial, points 13
15
Stiffness to Weight: Bending, points 24
52
Strength to Weight: Axial, points 26
28 to 30
Strength to Weight: Bending, points 23
35 to 36
Thermal Shock Resistance, points 22
14 to 15

Alloy Composition

Aluminum (Al), % 0
74.5 to 79.6
Carbon (C), % 0 to 0.1
0
Copper (Cu), % 0
4.0 to 5.0
Iron (Fe), % 88.6 to 91.2
0 to 1.3
Magnesium (Mg), % 0
0.45 to 0.65
Manganese (Mn), % 0.3 to 0.8
0 to 0.1
Molybdenum (Mo), % 0 to 0.1
0
Nickel (Ni), % 8.5 to 10
0
Phosphorus (P), % 0 to 0.020
0
Silicon (Si), % 0 to 0.35
16 to 18
Sulfur (S), % 0 to 0.0050
0
Titanium (Ti), % 0
0 to 0.2
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.2