MakeItFrom.com
Menu (ESC)

Grade 5 Titanium vs. 90-silver 10-cadmium-oxide

Grade 5 titanium belongs to the titanium alloys classification, while 90-silver 10-cadmium-oxide belongs to the otherwise unclassified metals. There are 8 material properties with values for both materials. Properties with values for just one material (24, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is grade 5 titanium and the bottom bar is 90-silver 10-cadmium-oxide.

Metric UnitsUS Customary Units

Material Properties

Density, g/cm3 4.4
10
Electrical Conductivity: Equal Volume, % IACS 1.0
72 to 100
Electrical Conductivity: Equal Weight (Specific), % IACS 2.0
64 to 91
Elongation at Break, % 8.6 to 11
1.1 to 28
Shear Strength, MPa 600 to 710
170 to 230
Strength to Weight: Axial, points 62 to 75
7.0 to 11
Strength to Weight: Bending, points 50 to 56
8.8 to 12
Tensile Strength: Ultimate (UTS), MPa 1000 to 1190
260 to 400

Comparable Variants