MakeItFrom.com
Menu (ESC)

SAE-AISI 1023 Steel vs. 1350 Aluminum

SAE-AISI 1023 steel belongs to the iron alloys classification, while 1350 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 1023 steel and the bottom bar is 1350 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 130 to 140
20 to 45
Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 17 to 29
1.4 to 30
Fatigue Strength, MPa 180 to 270
24 to 50
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
26
Shear Strength, MPa 280 to 300
44 to 110
Tensile Strength: Ultimate (UTS), MPa 430 to 480
68 to 190
Tensile Strength: Yield (Proof), MPa 240 to 410
25 to 170

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
660
Melting Onset (Solidus), °C 1420
650
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 53
230
Thermal Expansion, µm/m-K 12
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 6.9
61 to 62
Electrical Conductivity: Equal Weight (Specific), % IACS 8.0
200 to 210

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 1.4
8.3
Embodied Energy, MJ/kg 18
160
Embodied Water, L/kg 45
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 77 to 100
0.77 to 54
Resilience: Unit (Modulus of Resilience), kJ/m3 150 to 450
4.4 to 200
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 15 to 17
7.0 to 19
Strength to Weight: Bending, points 16 to 17
14 to 27
Thermal Diffusivity, mm2/s 14
96
Thermal Shock Resistance, points 14 to 15
3.0 to 8.2

Alloy Composition

Aluminum (Al), % 0
99.5 to 100
Boron (B), % 0
0 to 0.050
Carbon (C), % 0.2 to 0.25
0
Chromium (Cr), % 0
0 to 0.010
Copper (Cu), % 0
0 to 0.050
Gallium (Ga), % 0
0 to 0.030
Iron (Fe), % 99.06 to 99.5
0 to 0.4
Manganese (Mn), % 0.3 to 0.6
0 to 0.010
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0
0 to 0.1
Sulfur (S), % 0 to 0.050
0
Titanium (Ti), % 0
0 to 0.020
Vanadium (V), % 0
0 to 0.020
Zinc (Zn), % 0
0 to 0.050
Residuals, % 0
0 to 0.1