MakeItFrom.com
Menu (ESC)

C12600 Copper vs. 2014A Aluminum

C12600 copper belongs to the copper alloys classification, while 2014A aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C12600 copper and the bottom bar is 2014A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
72
Elongation at Break, % 56
6.2 to 16
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 56
27
Shear Strength, MPa 190
130 to 290
Tensile Strength: Ultimate (UTS), MPa 270
210 to 490
Tensile Strength: Yield (Proof), MPa 69
110 to 430

Thermal Properties

Latent Heat of Fusion, J/g 210
400
Maximum Temperature: Mechanical, °C 200
210
Melting Completion (Liquidus), °C 1080
640
Melting Onset (Solidus), °C 1030
510
Specific Heat Capacity, J/kg-K 390
870
Thermal Conductivity, W/m-K 130
150
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29
37
Electrical Conductivity: Equal Weight (Specific), % IACS 29
110

Otherwise Unclassified Properties

Base Metal Price, % relative 30
11
Density, g/cm3 8.9
3.0
Embodied Carbon, kg CO2/kg material 2.6
8.1
Embodied Energy, MJ/kg 41
150
Embodied Water, L/kg 310
1140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110
24 to 49
Resilience: Unit (Modulus of Resilience), kJ/m3 21
85 to 1300
Stiffness to Weight: Axial, points 7.2
13
Stiffness to Weight: Bending, points 18
46
Strength to Weight: Axial, points 8.2
19 to 45
Strength to Weight: Bending, points 10
26 to 46
Thermal Diffusivity, mm2/s 39
55
Thermal Shock Resistance, points 9.5
9.0 to 22

Alloy Composition

Aluminum (Al), % 0
90.8 to 95
Chromium (Cr), % 0
0 to 0.1
Copper (Cu), % 99.5 to 99.8
3.9 to 5.0
Iron (Fe), % 0
0 to 0.5
Magnesium (Mg), % 0
0.2 to 0.8
Manganese (Mn), % 0
0.4 to 1.2
Nickel (Ni), % 0
0 to 0.1
Phosphorus (P), % 0.2 to 0.4
0
Silicon (Si), % 0
0.5 to 0.9
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15