MakeItFrom.com
Menu (ESC)

C49300 Brass vs. 5383 Aluminum

C49300 brass belongs to the copper alloys classification, while 5383 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C49300 brass and the bottom bar is 5383 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
68
Elongation at Break, % 4.5 to 20
6.7 to 15
Poisson's Ratio 0.31
0.33
Shear Modulus, GPa 40
26
Shear Strength, MPa 270 to 290
190 to 220
Tensile Strength: Ultimate (UTS), MPa 430 to 520
310 to 370
Tensile Strength: Yield (Proof), MPa 210 to 410
150 to 310

Thermal Properties

Latent Heat of Fusion, J/g 170
390
Maximum Temperature: Mechanical, °C 120
200
Melting Completion (Liquidus), °C 880
650
Melting Onset (Solidus), °C 840
540
Specific Heat Capacity, J/kg-K 380
900
Thermal Conductivity, W/m-K 88
130
Thermal Expansion, µm/m-K 20
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 15
29
Electrical Conductivity: Equal Weight (Specific), % IACS 17
97

Otherwise Unclassified Properties

Base Metal Price, % relative 26
9.5
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 3.0
9.0
Embodied Energy, MJ/kg 50
160
Embodied Water, L/kg 370
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 71
23 to 40
Resilience: Unit (Modulus of Resilience), kJ/m3 220 to 800
170 to 690
Stiffness to Weight: Axial, points 7.2
14
Stiffness to Weight: Bending, points 19
50
Strength to Weight: Axial, points 15 to 18
32 to 38
Strength to Weight: Bending, points 16 to 18
38 to 42
Thermal Diffusivity, mm2/s 29
51
Thermal Shock Resistance, points 14 to 18
14 to 16

Alloy Composition

Aluminum (Al), % 0 to 0.5
92 to 95.3
Antimony (Sb), % 0 to 0.5
0
Bismuth (Bi), % 0.5 to 2.0
0
Chromium (Cr), % 0
0 to 0.25
Copper (Cu), % 58 to 62
0 to 0.2
Iron (Fe), % 0 to 0.1
0 to 0.25
Lead (Pb), % 0 to 0.010
0
Magnesium (Mg), % 0
4.0 to 5.2
Manganese (Mn), % 0 to 0.030
0.7 to 1.0
Nickel (Ni), % 0 to 1.5
0
Phosphorus (P), % 0 to 0.2
0
Selenium (Se), % 0 to 0.2
0
Silicon (Si), % 0 to 0.1
0 to 0.25
Tin (Sn), % 1.0 to 1.8
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 30.6 to 40.5
0 to 0.4
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15