MakeItFrom.com
Menu (ESC)

C69400 Brass vs. EN AC-43000 Aluminum

C69400 brass belongs to the copper alloys classification, while EN AC-43000 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C69400 brass and the bottom bar is EN AC-43000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
71
Elongation at Break, % 17
1.1 to 2.5
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 42
27
Tensile Strength: Ultimate (UTS), MPa 570
180 to 270
Tensile Strength: Yield (Proof), MPa 270
97 to 230

Thermal Properties

Latent Heat of Fusion, J/g 260
540
Maximum Temperature: Mechanical, °C 170
170
Melting Completion (Liquidus), °C 920
600
Melting Onset (Solidus), °C 820
590
Specific Heat Capacity, J/kg-K 410
900
Thermal Conductivity, W/m-K 26
140
Thermal Expansion, µm/m-K 18
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 6.2
38
Electrical Conductivity: Equal Weight (Specific), % IACS 6.7
130

Otherwise Unclassified Properties

Base Metal Price, % relative 27
9.5
Density, g/cm3 8.3
2.6
Embodied Carbon, kg CO2/kg material 2.7
7.8
Embodied Energy, MJ/kg 44
150
Embodied Water, L/kg 300
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 80
2.9 to 5.7
Resilience: Unit (Modulus of Resilience), kJ/m3 340
66 to 360
Stiffness to Weight: Axial, points 7.4
15
Stiffness to Weight: Bending, points 19
54
Strength to Weight: Axial, points 19
20 to 29
Strength to Weight: Bending, points 18
28 to 36
Thermal Diffusivity, mm2/s 7.7
60
Thermal Shock Resistance, points 20
8.6 to 12

Alloy Composition

Aluminum (Al), % 0
87 to 90.8
Copper (Cu), % 80 to 83
0 to 0.050
Iron (Fe), % 0 to 0.2
0 to 0.55
Lead (Pb), % 0 to 0.3
0 to 0.050
Magnesium (Mg), % 0
0.2 to 0.45
Manganese (Mn), % 0
0 to 0.45
Nickel (Ni), % 0
0 to 0.050
Silicon (Si), % 3.5 to 4.5
9.0 to 11
Tin (Sn), % 0
0 to 0.050
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 11.5 to 16.5
0 to 0.1
Residuals, % 0
0 to 0.15