MakeItFrom.com
Menu (ESC)

N08330 Stainless Steel vs. 1435 Aluminum

N08330 stainless steel belongs to the iron alloys classification, while 1435 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is N08330 stainless steel and the bottom bar is 1435 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 34
4.1 to 32
Fatigue Strength, MPa 190
27 to 49
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 360
54 to 87
Tensile Strength: Ultimate (UTS), MPa 550
81 to 150
Tensile Strength: Yield (Proof), MPa 230
23 to 130

Thermal Properties

Latent Heat of Fusion, J/g 310
400
Maximum Temperature: Mechanical, °C 1050
170
Melting Completion (Liquidus), °C 1390
650
Melting Onset (Solidus), °C 1340
640
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 12
230
Thermal Expansion, µm/m-K 16
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
60
Electrical Conductivity: Equal Weight (Specific), % IACS 1.9
200

Otherwise Unclassified Properties

Base Metal Price, % relative 32
9.0
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 5.4
8.2
Embodied Energy, MJ/kg 77
150
Embodied Water, L/kg 190
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 150
5.0 to 20
Resilience: Unit (Modulus of Resilience), kJ/m3 140
3.8 to 110
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 19
8.3 to 15
Strength to Weight: Bending, points 18
15 to 23
Thermal Diffusivity, mm2/s 3.1
93
Thermal Shock Resistance, points 13
3.6 to 6.7

Alloy Composition

Aluminum (Al), % 0
99.35 to 99.7
Carbon (C), % 0 to 0.080
0
Chromium (Cr), % 17 to 20
0
Copper (Cu), % 0 to 1.0
0 to 0.020
Iron (Fe), % 38.3 to 48.3
0.3 to 0.5
Lead (Pb), % 0 to 0.0050
0
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 0 to 2.0
0 to 0.050
Nickel (Ni), % 34 to 37
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0.75 to 1.5
0 to 0.15
Sulfur (S), % 0 to 0.030
0
Tin (Sn), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.030
Zinc (Zn), % 0
0 to 0.1