MakeItFrom.com
Menu (ESC)

N08810 Stainless Steel vs. 512.0 Aluminum

N08810 stainless steel belongs to the iron alloys classification, while 512.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is N08810 stainless steel and the bottom bar is 512.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 33
2.0
Fatigue Strength, MPa 160
58
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Tensile Strength: Ultimate (UTS), MPa 520
130
Tensile Strength: Yield (Proof), MPa 200
83

Thermal Properties

Latent Heat of Fusion, J/g 300
420
Maximum Temperature: Mechanical, °C 1100
180
Melting Completion (Liquidus), °C 1400
630
Melting Onset (Solidus), °C 1350
590
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 12
150
Thermal Expansion, µm/m-K 14
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
38
Electrical Conductivity: Equal Weight (Specific), % IACS 1.9
130

Otherwise Unclassified Properties

Base Metal Price, % relative 30
9.5
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 5.3
8.8
Embodied Energy, MJ/kg 76
150
Embodied Water, L/kg 200
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
2.3
Resilience: Unit (Modulus of Resilience), kJ/m3 100
50
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
51
Strength to Weight: Axial, points 18
14
Strength to Weight: Bending, points 18
22
Thermal Diffusivity, mm2/s 3.0
60
Thermal Shock Resistance, points 13
6.1

Alloy Composition

Aluminum (Al), % 0.15 to 0.6
90.6 to 95.1
Carbon (C), % 0.050 to 0.1
0
Chromium (Cr), % 19 to 23
0 to 0.25
Copper (Cu), % 0 to 0.75
0 to 0.35
Iron (Fe), % 39.5 to 50.7
0 to 0.6
Magnesium (Mg), % 0
3.5 to 4.5
Manganese (Mn), % 0 to 1.5
0 to 0.8
Nickel (Ni), % 30 to 35
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
1.4 to 2.2
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0.15 to 0.6
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15