MakeItFrom.com
Menu (ESC)

N08810 Stainless Steel vs. A357.0 Aluminum

N08810 stainless steel belongs to the iron alloys classification, while A357.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is N08810 stainless steel and the bottom bar is A357.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 33
3.7
Fatigue Strength, MPa 160
100
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 340
240
Tensile Strength: Ultimate (UTS), MPa 520
350
Tensile Strength: Yield (Proof), MPa 200
270

Thermal Properties

Latent Heat of Fusion, J/g 300
500
Maximum Temperature: Mechanical, °C 1100
170
Melting Completion (Liquidus), °C 1400
610
Melting Onset (Solidus), °C 1350
560
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 12
160
Thermal Expansion, µm/m-K 14
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
40
Electrical Conductivity: Equal Weight (Specific), % IACS 1.9
140

Otherwise Unclassified Properties

Base Metal Price, % relative 30
12
Density, g/cm3 8.0
2.6
Embodied Carbon, kg CO2/kg material 5.3
8.2
Embodied Energy, MJ/kg 76
150
Embodied Water, L/kg 200
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
12
Resilience: Unit (Modulus of Resilience), kJ/m3 100
520
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 24
53
Strength to Weight: Axial, points 18
38
Strength to Weight: Bending, points 18
43
Thermal Diffusivity, mm2/s 3.0
68
Thermal Shock Resistance, points 13
17

Alloy Composition

Aluminum (Al), % 0.15 to 0.6
90.8 to 93
Beryllium (Be), % 0
0.040 to 0.070
Carbon (C), % 0.050 to 0.1
0
Chromium (Cr), % 19 to 23
0
Copper (Cu), % 0 to 0.75
0 to 0.2
Iron (Fe), % 39.5 to 50.7
0 to 0.2
Magnesium (Mg), % 0
0.4 to 0.7
Manganese (Mn), % 0 to 1.5
0 to 0.1
Nickel (Ni), % 30 to 35
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 1.0
6.5 to 7.5
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0.15 to 0.6
0.040 to 0.2
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15