MakeItFrom.com
Menu (ESC)

1050-H112 Aluminum

1050-H112 aluminum is 1050 aluminum in the H112 temper. This temper is actually just a variation on F (as-fabricated) that allows for the possibility of very limited strain hardening or heat treatment, under certain conditions.

It has the second lowest strength and second highest ductility compared to the other variants of 1050 aluminum.

The graph bars on the material properties cards below compare 1050-H112 aluminum to: 1000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Elastic (Young's, Tensile) Modulus

68 GPa 9.9 x 106 psi

Elongation at Break

20 %

Fatigue Strength

31 MPa 4.5 x 103 psi

Poisson's Ratio

0.33

Shear Modulus

26 GPa 3.7 x 106 psi

Shear Strength

52 MPa 7.5 x 103 psi

Tensile Strength: Ultimate (UTS)

83 MPa 12 x 103 psi

Tensile Strength: Yield (Proof)

34 MPa 4.9 x 103 psi

Thermal Properties

Latent Heat of Fusion

400 J/g

Maximum Temperature: Mechanical

170 °C 340 °F

Melting Completion (Liquidus)

640 °C 1190 °F

Melting Onset (Solidus)

650 °C 1190 °F

Specific Heat Capacity

900 J/kg-K 0.22 BTU/lb-°F

Thermal Conductivity

230 W/m-K 130 BTU/h-ft-°F

Thermal Expansion

24 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

61 % IACS

Electrical Conductivity: Equal Weight (Specific)

200 % IACS

Otherwise Unclassified Properties

Base Metal Price

9.5 % relative

Calomel Potential

-750 mV

Density

2.7 g/cm3 170 lb/ft3

Embodied Carbon

8.3 kg CO2/kg material

Embodied Energy

160 MJ/kg 67 x 103 BTU/lb

Embodied Water

1200 L/kg 140 gal/lb

Common Calculations

Resilience: Ultimate (Unit Rupture Work)

13 MJ/m3

Resilience: Unit (Modulus of Resilience)

8.3 kJ/m3

Stiffness to Weight: Axial

14 points

Stiffness to Weight: Bending

50 points

Strength to Weight: Axial

8.5 points

Strength to Weight: Bending

16 points

Thermal Diffusivity

94 mm2/s

Thermal Shock Resistance

3.7 points

Alloy Composition

Aluminum (Al)Al 99.5 to 100
Iron (Fe)Fe 0 to 0.4
Silicon (Si)Si 0 to 0.25
Manganese (Mn)Mn 0 to 0.050
Zinc (Zn)Zn 0 to 0.050
Copper (Cu)Cu 0 to 0.050
Magnesium (Mg)Mg 0 to 0.050
Vanadium (V)V 0 to 0.050
Titanium (Ti)Ti 0 to 0.030

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Further Reading

ASTM B491: Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

Aluminum: Properties and Physical Metallurgy, John E. Hatch (editor), 1984

Aluminum Standards and Data, Aluminum Association Inc., 2013

ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties

CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015