MakeItFrom.com
Menu (ESC)

AWS E100C-K3 or E69C-K3 Weld Metal

AWS E100C-K3 is a weld metal formulated for joining alloy steels. Cited properties are appropriate for the as-welded condition. It has a moderately high tensile strength among alloy steel welding fillers. In addition, it has a moderately low ductility and a moderately high electrical conductivity.

The graph bars on the material properties cards below compare AWS E100C-K3 to: alloy steel welding fillers (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Elastic (Young's, Tensile) Modulus

190 GPa 27 x 106 psi

Elongation at Break

18 %

Poisson's Ratio

0.29

Shear Modulus

73 GPa 11 x 106 psi

Tensile Strength: Ultimate (UTS)

770 MPa 110 x 103 psi

Tensile Strength: Yield (Proof)

700 MPa 100 x 103 psi

Thermal Properties

Latent Heat of Fusion

250 J/g

Melting Completion (Liquidus)

1460 °C 2650 °F

Melting Onset (Solidus)

1410 °C 2580 °F

Specific Heat Capacity

470 J/kg-K 0.11 BTU/lb-°F

Thermal Conductivity

48 W/m-K 28 BTU/h-ft-°F

Thermal Expansion

13 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

7.9 % IACS

Electrical Conductivity: Equal Weight (Specific)

9.0 % IACS

Otherwise Unclassified Properties

Base Metal Price

3.4 % relative

Density

7.8 g/cm3 490 lb/ft3

Embodied Carbon

1.7 kg CO2/kg material

Embodied Energy

23 MJ/kg 9.8 x 103 BTU/lb

Embodied Water

53 L/kg 6.3 gal/lb

Common Calculations

Resilience: Ultimate (Unit Rupture Work)

130 MJ/m3

Resilience: Unit (Modulus of Resilience)

1290 kJ/m3

Stiffness to Weight: Axial

13 points

Stiffness to Weight: Bending

24 points

Strength to Weight: Axial

27 points

Strength to Weight: Bending

24 points

Thermal Diffusivity

13 mm2/s

Thermal Shock Resistance

23 points

Alloy Composition

Iron (Fe) 92.6 to 98.5
Nickel (Ni) 0.5 to 2.5
Manganese (Mn) 0.75 to 2.3
Molybdenum (Mo) 0.25 to 0.65
Silicon (Si) 0 to 0.8
Copper (Cu) 0 to 0.35
Carbon (C) 0 to 0.15
Chromium (Cr) 0 to 0.15
Vanadium (V) 0 to 0.030
Phosphorus (P) 0 to 0.025
Sulfur (S) 0 to 0.025
Residuals 0 to 0.5

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Similar Alloys

Further Reading

AWS A5.28: Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding

Welding Metallurgy, 2nd ed., Sindo Kou, 2003