EN 1.1132 (C15E2C) Non-Alloy Steel
EN 1.1132 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1.1132 is the EN numeric designation for this material. C15E2C is the EN chemical designation.
The properties of EN 1.1132 steel include four common variations. This page shows summary ranges across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare EN 1.1132 steel to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Brinell Hardness
110 to 140
Elastic (Young's, Tensile) Modulus
190 GPa 27 x 106 psi
Elongation at Break
12 to 24 %
Fatigue Strength
180 to 280 MPa 26 to 40 x 103 psi
Poisson's Ratio
0.29
Reduction in Area
63 to 73 %
Shear Modulus
73 GPa 11 x 106 psi
Shear Strength
260 to 310 MPa 38 to 44 x 103 psi
Tensile Strength: Ultimate (UTS)
370 to 490 MPa 54 to 71 x 103 psi
Tensile Strength: Yield (Proof)
240 to 400 MPa 35 to 58 x 103 psi
Thermal Properties
Latent Heat of Fusion
250 J/g
Maximum Temperature: Mechanical
400 °C 750 °F
Melting Completion (Liquidus)
1460 °C 2670 °F
Melting Onset (Solidus)
1420 °C 2590 °F
Specific Heat Capacity
470 J/kg-K 0.11 BTU/lb-°F
Thermal Conductivity
51 W/m-K 29 BTU/h-ft-°F
Thermal Expansion
12 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
7.0 % IACS
Electrical Conductivity: Equal Weight (Specific)
8.0 % IACS
Otherwise Unclassified Properties
Base Metal Price
1.8 % relative
Density
7.9 g/cm3 490 lb/ft3
Embodied Carbon
1.4 kg CO2/kg material
Embodied Energy
18 MJ/kg 7.9 x 103 BTU/lb
Embodied Water
46 L/kg 5.5 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
38 to 110 MJ/m3
Resilience: Unit (Modulus of Resilience)
160 to 430 kJ/m3
Stiffness to Weight: Axial
13 points
Stiffness to Weight: Bending
24 points
Strength to Weight: Axial
13 to 17 points
Strength to Weight: Bending
15 to 18 points
Thermal Diffusivity
14 mm2/s
Thermal Shock Resistance
12 to 16 points
Alloy Composition
| Fe | 98.6 to 99.57 | |
| Mn | 0.3 to 0.6 | |
| C | 0.13 to 0.17 | |
| Si | 0 to 0.3 | |
| Cu | 0 to 0.25 | |
| P | 0 to 0.025 | |
| S | 0 to 0.025 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Similar Alloys
Further Reading
EN 10263-3: Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
Carbon Steel Handbook, D. Gandy, 2007
Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008
Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015