MakeItFrom.com
Menu (ESC)

ACI-ASTM CF8M (SCS14, SCS14A, J92900) Cast Stainless Steel

ACI-ASTM CF8M steel is an austenitic stainless steel formulated for casting. Cited properties are appropriate for the heat treated (HT) condition. CF8M is the designation in both the ACI and ASTM systems for this material. J92900 is the UNS number.

It has a fairly high ductility and a moderately high thermal conductivity among cast austenitic stainless steels.

The graph bars on the material properties cards below compare ACI-ASTM CF8M steel to: cast austenitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Brinell Hardness

170

Elastic (Young's, Tensile) Modulus

200 GPa 29 x 106 psi

Elongation at Break

50 %

Fatigue Strength

280 MPa 41 x 103 psi

Poisson's Ratio

0.28

Shear Modulus

78 GPa 11 x 106 psi

Tensile Strength: Ultimate (UTS)

540 MPa 79 x 103 psi

Tensile Strength: Yield (Proof)

290 MPa 42 x 103 psi

Thermal Properties

Latent Heat of Fusion

300 J/g

Maximum Temperature: Corrosion

420 °C 790 °F

Maximum Temperature: Mechanical

1000 °C 1840 °F

Melting Completion (Liquidus)

1440 °C 2620 °F

Melting Onset (Solidus)

1400 °C 2550 °F

Specific Heat Capacity

480 J/kg-K 0.11 BTU/lb-°F

Thermal Conductivity

16 W/m-K 9.3 BTU/h-ft-°F

Thermal Expansion

16 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

2.0 % IACS

Electrical Conductivity: Equal Weight (Specific)

2.3 % IACS

Otherwise Unclassified Properties

Base Metal Price

19 % relative

Density

7.8 g/cm3 490 lb/ft3

Embodied Carbon

3.8 kg CO2/kg material

Embodied Energy

53 MJ/kg 23 x 103 BTU/lb

Embodied Water

160 L/kg 19 gal/lb

Common Calculations

PREN (Pitting Resistance)

28

Resilience: Ultimate (Unit Rupture Work)

230 MJ/m3

Resilience: Unit (Modulus of Resilience)

210 kJ/m3

Stiffness to Weight: Axial

14 points

Stiffness to Weight: Bending

25 points

Strength to Weight: Axial

19 points

Strength to Weight: Bending

19 points

Thermal Diffusivity

4.3 mm2/s

Thermal Shock Resistance

12 points

Alloy Composition

Among cast stainless steels, the composition of ACI-ASTM CF8M steel is notable for containing comparatively high amounts of molybdenum (Mo) and nickel (Ni). Molybdenum is used to facilitate tempering. In addition, it offers modest bonuses to a wide range of material properties. Nickel is primarily used to achieve a specific microstructure. In addition, it has a beneficial effect on mechanical properties and certain types of corrosion.

Iron (Fe) 60.3 to 71
Chromium (Cr) 18 to 21
Nickel (Ni) 9.0 to 12
Molybdenum (Mo) 2.0 to 3.0
Silicon (Si) 0 to 2.0
Manganese (Mn) 0 to 1.5
Carbon (C) 0 to 0.080
Phosphorus (P) 0 to 0.040
Sulfur (S) 0 to 0.040

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Similar Alloys

Further Reading

ASTM A743: Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

Corrosion of Austenitic Stainless Steels: Mechanism, Mitigation and Monitoring, H. S. Khatak and B. Raj (editors), 2002

Austenitic Stainless Steels: Microstructure and Mechanical Properties, P. Marshall, 1984

Properties and Selection: Irons, Steels and High Performance Alloys, ASM Handbook vol. 1, ASM International, 1993

ASM Specialty Handbook: Stainless Steels, J. R. Davis (editor), 1994

Advances in Stainless Steels, Baldev Raj et al. (editors), 2010