MakeItFrom.com
Menu (ESC)

EN 1.4518 (GX2CrNiMo19-11-3) Cast Stainless Steel

EN 1.4518 stainless steel is a duplex stainless steel formulated for casting. Cited properties are appropriate for the solution annealed (AT) condition. 1.4518 is the EN numeric designation for this material. GX2CrNiMo19-11-3 is the EN chemical designation.

It has a moderately high ductility and the lowest tensile strength among cast duplex stainless steels.

The graph bars on the material properties cards below compare EN 1.4518 stainless steel to: cast duplex stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Elastic (Young's, Tensile) Modulus

200 GPa 29 x 106 psi

Elongation at Break

34 %

Fatigue Strength

160 MPa 24 x 103 psi

Impact Strength: V-Notched Charpy

90 J 66 ft-lb

Poisson's Ratio

0.28

Shear Modulus

79 GPa 11 x 106 psi

Tensile Strength: Ultimate (UTS)

490 MPa 71 x 103 psi

Tensile Strength: Yield (Proof)

210 MPa 30 x 103 psi

Thermal Properties

Latent Heat of Fusion

300 J/g

Maximum Temperature: Corrosion

420 °C 790 °F

Maximum Temperature: Mechanical

1000 °C 1830 °F

Melting Completion (Liquidus)

1450 °C 2640 °F

Melting Onset (Solidus)

1400 °C 2560 °F

Specific Heat Capacity

470 J/kg-K 0.11 BTU/lb-°F

Thermal Conductivity

15 W/m-K 8.8 BTU/h-ft-°F

Thermal Expansion

12 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

2.1 % IACS

Electrical Conductivity: Equal Weight (Specific)

2.4 % IACS

Otherwise Unclassified Properties

Base Metal Price

20 % relative

Density

7.9 g/cm3 490 lb/ft3

Embodied Carbon

4.0 kg CO2/kg material

Embodied Energy

55 MJ/kg 23 x 103 BTU/lb

Embodied Water

160 L/kg 19 gal/lb

Common Calculations

PREN (Pitting Resistance)

30

Resilience: Ultimate (Unit Rupture Work)

140 MJ/m3

Resilience: Unit (Modulus of Resilience)

100 kJ/m3

Stiffness to Weight: Axial

14 points

Stiffness to Weight: Bending

25 points

Strength to Weight: Axial

17 points

Strength to Weight: Bending

18 points

Thermal Diffusivity

4.1 mm2/s

Thermal Shock Resistance

14 points

Alloy Composition

Among cast stainless steels, the composition of EN 1.4518 stainless steel is notable for containing a comparatively high amount of molybdenum (Mo). Molybdenum is used to facilitate tempering. In addition, it offers modest bonuses to a wide range of material properties.

Iron (Fe) 61.4 to 70
Chromium (Cr) 18 to 20
Nickel (Ni) 9.0 to 12
Molybdenum (Mo) 3.0 to 3.5
Manganese (Mn) 0 to 1.5
Silicon (Si) 0 to 1.5
Phosphorus (P) 0 to 0.040
Carbon (C) 0 to 0.030
Sulfur (S) 0 to 0.030

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Similar Alloys

Further Reading

ISO 11972: Corrosion-resistant cast steels for general applications

Duplex Stainless Steels, Iris Alvarez-Armas and Suzanne Degallaix-Moreuil (editors), 2009

Duplex Stainless Steels: Microstructure, Properties and Applications, Robert N. Gunn (editor), 1997

Corrosion of Stainless Steels, A. John Sedriks, 1996

Advances in Stainless Steels, Baldev Raj et al. (editors), 2010